{"product_id":"mettler-toledo-30571936","title":"Mettler Toledo, 30571936,  Analyzer 2850Si Silica 4\/Enc\/PO4","description":"\n\u003cb\u003eSpecification\u003c\/b\u003e\nSilica measurement range: 0-5000 ppb, limit of detection per ASTM Method D7126\nPhosphate measurement range: 0.3 - 10 ppm\nOperating Range (Temp.): 5 °C – 60 °C  41 °F – 140 °F\nSample Flow rate: 50 – 250 mL \/ min\nProcess Connection: Sample inlet: 6 mm or 1\/4\" OD tube SS compression fitting Drain hose: 19 x 25.4 mm (¾ x 1\"), 2 m (6 ft) length included\nProtection Rating: IP55\nIngress Protection: IP55 (Enclosure) IP66 \/ NEMA4X (Electronics)\nSilica Measurement Accuracy: ± 5 % of reading or ± 1 ppb, whichever is greater\nOperator Interface: Simultaneous display of silica and\/or phosphate concentration and measurement or auto-cal status TFT color touchscreen\nZero calibration: Automatic, every measurement cycle\nAnalog Output: Powered 0 \/ 4 – 20 mA, 22 mA alarm, 500 ohm max load, not for use with externally powered circuit\nAnalog Output Scaling: Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging\nPower Supply: 100 – 240 VAC, 50 – 60 Hz, 100 W on power loss all settings are retained without batteries\nPower Supply (AC\/DC): 100 V – 240 V\nFlow Rate: 50 mL\/min – 250 mL\/min\nDigital Input: Remote start \/ stop of measurement cycle\nMeasurement Parameter: Silica\/Phosphate\nReagent Consumption: Approx 500 mL each per 3 months with 20 min measurement cycle time\nHumidity: 10 – 90 % non-condensing\nCommunication: PROFIBUS DP\nGrab Sample Measurement: 500 mL capacity\nPhosphate Measurement Accuracy: ± 10 % of reading or ± 0.3 ppm, whichever is greater\nSample Pressure: 0.3 – 7 bar (5 – 100 psig)\nAnalog Output Accuracy: ± 0.05 mA\nMeasurement Cycle Time: 20 min typical Adjustable ≥ 10 min\nWeight: 18 kg (40 lbs)\nSample Temperature: 5 – 60 °C (41 – 140 °F)\nModel Family: 2850Si\nEnclosureType: Full\nDimensions HWD: Enclosure: 543 x 413 x 300 mm (21.4\" x 16.3\" x 11.8\")\nOutputs: 8 Powered 0 \/ 4 – 20 mA\nRelay Contact(s): 4-SPST Type Reed 250 VAC or DC, 0.5 A 4-SPST mechanical rated at 250 VAC, 3 A\nResolution: 4 digits with decimal, autoranging 0.001 ppb in lowest range\nBuilt-in sequencer: Yes\nAmbient Operating Temperature: 10 – 50 °C (50 – 122 °F)\nRatings\/Approvals: CE, cULus\nSpan calibration: Automatic per schedule once per month, typical","brand":"Mettler Toledo","offers":[{"title":"Default Title","offer_id":47170418049193,"sku":"30571936","price":0.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/iright.com\/es\/products\/mettler-toledo-30571936","provider":"Iright","version":"1.0","type":"link"}