BD, 560445, BD Pharmingen™ Alexa Fluor® 488 Mouse anti-H2AX (pS139)

Alternative Name: H2A.X; H2A/X; H2AFX; HIST5-2AX; gamma-H2AX; γ-H2AX; H2AX (pS140)
Reactivity: Human (QC Testing), Mouse (Tested in Development)
Isotype: Mouse BALB/c IgG1, κ
Immunogen: Phosphorylated Human H2AX Peptide
Application: Bioimaging (Routinely Tested), Intracellular staining (flow cytometry) (Tested During Development)
Vol. Per Test: 5 µl
RRID: AB_1645352
Storage Buffer: Aqueous buffered solution containing BSA, protein stabilizer, and ≤0.09% sodium azide.
Regulatory Status: RUO
Preparation And Storage: Preparation And Storage Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze. The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated to Alexa Fluor® 488 under optimum conditions, and unreacted Alexa Fluor® 488 was removed.
Recommended Assay Procedures: Recommended Assay Procedures Recommended Assay Procedure for Bioimaging: http://www.bdbiosciences.com/support/resources/protocols/ceritifed_reagents.jsp or  http://www.bdbiosciences.com/bioimaging/reagents 1. Seed the cells in appropriate culture medium at an appropriate cell density in a BD Falcon™ 96-well Imaging Plate (Cat. No. 353219), and culture overnight to 48 hours. 2. Remove the culture medium from the wells, and wash (one to two times) with 100 μl of 1× PBS. 3. Fix the cells by adding 100 µl of fresh 3.7% Formaldehyde in PBS or BD Cytofix™ fixation buffer (Cat. No. 554655) to each well and incubating for 10 minutes at room temperature (RT). 4. Remove the fixative from the wells, and wash the wells (one to two times) with 100 μl of 1× PBS. 5. Permeabilize the cells using either cold methanol (a), Triton™ X-100 (b), or Saponin (c): a. Add 100 µl of -20 ° C 90% methanol or -20 ° C BD™ Phosflow Perm Buffer III (Cat. No. 558050) to each well and incubate for 5 minutes at RT. b. Add 100 µl of 0.1% Triton™ X-100 to each well and incubate for 5 minutes at RT. c. Add 100 µl of 1× Perm/Wash buffer (Cat. No. 554723) to each well and incubate for 15 to 30 minutes at RT.  Continue to use 1× Perm/Wash buffer for all subsequent wash and dilutions steps. 6. Remove the permeabilization buffer from the wells, and wash one to two times with 100 μl of appropriate buffer (either 1× PBS or 1× Perm/Wash buffer, see step 5.c.). 7. Optional blocking step:  Remove the wash buffers, and block the cells by adding 100 µl of blocking buffer BD Pharmingen™ Stain Buffer (FBS) (Cat. No. 554656) or 3% FBS in appropriate dilution buffer to each well and incubating for 15 to 30 minutes at RT. 8. Dilute the antibody to its optimal working concentration in appropriate dilution buffer. Titrate purified (unconjugated) antibodies and second-step reagents to determine the optimal concentration.  If using a Bioimaging Certified antibody conjugate, dilute it 1:10. 9. Add 50 µl of diluted antibody per well and incubate for 60 minutes at RT.  Incubate in the dark if using fluorescently labeled antibodies. 10. Remove the antibody, and wash the wells three times with 100 μl of wash buffer.  An optional detergent wash (100 μl of 0.05% Tween in 1× PBS) can be included prior to the regular wash steps. 11.   If the antibody being used is fluorescently labeled, then move to step 12.  Otherwise, if using a purified unlabeled antibody, repeat steps 8 to 10 with a fluorescently labeled second-step reagent to detect the purified antibody. 12. After the final wash, counter-stain the nuclei by adding 100 μ l of a 2 μ g/ml solution of Hoechst 33342 (eg, Sigma-Aldrich Cat. No. B2261) in 1× PBS to each well at least 15 minutes before imaging. 13. View and analyze the cells on an appropriate imaging instrument.  Recommended filters for the BD Pathway™ instruments are: Instrument Excitation Emission Dichroic BD Pathway 855 488/10 515 LP Fura/FITC BD Pathway 435 482/35 536/40 FF506
Product Notices: Product Notices This reagent has been pre-diluted for use at the recommended Volume per Test when following the Recommended Assay Procedure. A Test is typically ~10,000 cells cultured in a well of a 96-well imaging plate. The Alexa Fluor®, Pacific Blue™, and Cascade Blue® dye antibody conjugates in this product are sold under license from Molecular Probes, Inc. for research use only, excluding use in combination with microarrays, or as analyte specific reagents. The Alexa Fluor® dyes (except for Alexa Fluor® 430), Pacific Blue™ dye, and Cascade Blue® dye are covered by pending and issued patents. Alexa Fluor® 488 fluorochrome emission is collected at the same instrument settings as for fluorescein isothiocyanate (FITC). For fluorochrome spectra and suitable instrument settings, please refer to our Multicolor Flow Cytometry web page at www.bdbiosciences.com/colors. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing. Alexa Fluor® is a registered trademark of Molecular Probes, Inc., Eugene, OR. Triton is a trademark of the Dow Chemical Company. Source of all serum proteins is from USDA inspected abattoirs located in the United States. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.