Eppendorf, 5075000045, epMotion® 5075t NGS Solution

Product Information
MultiCon PC, completely contained housing, ThermoMixer, thermal module, 4 dispensing tools, gripper, NGS specific accessories and consumables, epBlue software with Enhanced Feature Set 1, system for solid and liquid waste
100 – 240 V/50 – 60 Hz, 0.2 µL – 1 mL, (depending on dispensing tools)

Technical Data
Eppendorf ThermoMixer ®:
Speed: 300 – 2,000 rpm
Time range setting: −
Max. load: 1,000 g / 2.2 lb
Temperature range: 15 °C below RT to 95 °C
Heating rate: 5 °C/min
Cooling rate above RT: 3 °C/min
Cooling rate below RT: 1 °C/min
Thermal module:
Max. number of modules: −
Time range setting: −
Temperature range: 0 °C – 110 °C
Heating rate: −
Cooling rate: −
Vacuum unit:
Vacuum max. output: −
Suction range: −
Suction time: −
Volume range: 0.2 µL – 1 mL
Operating mode: automation
Autoclavable: yes (tools)
Power supply: 100 – 240 V, 50 – 60 Hz
Consumables: epT.I.P.S. motion tips as racks or reload
Max. power consumption: −
Dimensions (W × D × H): 108 × 62 × 81 cm / 43 × 25 × 32 in
Product weight: 124 kg / 273 lb
SLAS/ANSI positions: 14.5

Features
Includes integrated Eppendorf ThermoMixer ® , thermal module and all the tools, accessories and consumables needed for NGS library preparation
14.5 SLAS/ANSI deck positions and automatic tool exchange for 4 tools and gripper
Volume range from 0.2 to 1,000 µL (depending on dispensing tools used)
Compatible with tubes from 0.2 mL to 50 mL and micro and PCR plates up to 384 wells
Optical sensor for detecting liquids, labware, tips
MultiCon PC controller with simulation, network and software upgrade options
Intuitive drag-and-drop-based software
Optional UV lamp and air filter system for decontamination and clean air conditions
Integrated LEDs for deck illumination and visual feedback of system status like idle, run in progress or run finished
Optional software extensions for handling barcodes and supporting regulated environments complaint to e. g. 21 CFR part 11