Waters, 186006469, XSelect HSS T3 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pk

The trifunctional alkyl C18 bonded phase used for the HSS T3 sorbents is compatible with 100% aqueous mobile phase and provides ultra-low MS bleed, while promoting superior polar compound retention. HSS T3 HPLC columns are fully scalable and transferable to UPLC separations.

Specifications
Chemistry: C18
Separation Mode: Reversed Phase
Particle Substrate: Silica
pH Range Min: 2 pH
pH Range Max: 8 pH
Temperature Limits: 45 C
Maximum Pressure: 6000 psi (415 Bar)
Endcapped: Yes
Bonding Technology: T3
Silanol Activity: Medium
Particle Shape: Spherical
Particle Size: 3.5 µm
Endfitting Type: Waters
Pore Size: 100 Å
Format: Column
Surface Area: 230
System: HPLC
Particle Technology: HSS
USP Classification: L1
Inner Diameter: 4.6 mm
Length: 75 mm
Carbon Load: 11 %
UNSPSC: 41115709
Brand: XSelect
Product Type: Columns
Units per Package: 1 pk

Additional Information
XSelect HSS T3 Column, 100Å, 3.5 µm, 4.6 mm X 75 mm, 1/pk The XSelect HSS T3 Column is made to offer you the highest level of transferability and reproducibility. You can perform higher resolution separations that are necessary for complicated samples in order to separate and quantify the distinct ingredients because the lab equipment has the chemical and physical properties for seamless scalability. It combines effectiveness and selectivity to improve sample resolution that is extremely complicated. The XSelect HSS T3 Columns have a wide range of uses; thus we strongly advise you to give them some thought if you need to establish separations for both polar and nonpolar chemicals. Low-coverage C18 phase is used in the XSelect HSS T3 Column and is compatible with 100% aqueous mobile phase. The XSelect HSS T3 Column's properties allow for ultra-low MS bleed, complete scalability, and transfer to UPLC separations. This specific XSelect HSS T3 Column is based on Waters' High Strength Silica Technology, also known as HSS Technology. The BEH (Ethylene Bridged Hybrid) and CSH (Charged Surface Hybrid) particles' chromatographic performance and scalability were carefully complemented by the HSS Technology. In contrast to other columns in the same area, it enables the column to offer special and distinctive advantages. Higher silanophilicity is provided by the incorporated technology in the XSelect HSS T3 Column, increasing polar retention and selectivity in analysis. Your productivity can be considerably increased by adding the best fit lab equipment. Please visit our shop for lab equipment; you can browse through our website, refer to our catalog, and make sure your lab needs are covered as needed. There, you can learn more about the variations of other XSelect products and further Waters offerings that work with them. We also recommend checking out the XSelect HSS T3 VanGuard Cartridge, 100, 3.5 m, 3.9 mm X 5 mm, 3/pk, which is recommended for use with the XSelect HSS T3 Column; it is used to prolong the lifetime and performance of analytical columns by removing particulate contamination from the mobile phase stream. All 4.6 mm I.D. XSelect HSS T3 analytical columns with 3.5 m sorbent particles are protected by this cartridge.

FAQ
What Effect Can Polarity Have On Chromatographic Separation? When polar solvents are employed instead of nonpolar solvents, polar molecules move farther because they are more strongly attracted to polar solvents. In your laboratory, you can use the comparisons and measurements that can be conducted between the distance that spots move and the solvent's total movement.