BD, 557081, BD Pharmingen™ Rat Immunoglobulin Isotyping ELISA Kit

Application: ELISA (Routinely Tested)
Regulatory Status: RUO
RRID: AB_2869091
Description: Description The Rat Immunoglobulin Isotyping ELISA Kit enables rapid, efficient identification of rat immunoglobulin isotypes. This kit employs a direct horseradish peroxidase-labeled system and the assay format eliminates the need for coating the plate with antigen. These features lead to a significant reduction in assay time without sacrificing sensitivity.  Each antibody was generated from rat immunoglobulin (Ig) antigen and has been extensively tested for reactivity toward rat Ig isotypes. Each monoclonal antibody is specific for its stated isotype. However, cross-reactivity may be observed in some instances between the anti-rat IgG2a antibody pair and rat IgG1 isotype antibodies, as well as the anti-rat Ig λ antibody pair and rat IgE κ isotype antibodies. The positive control is a mixture of purified monoclonal rat immunoglobulins of nine Ig heavy- and light-chain isotype combinations (IgG1κ, IgG1λ, IgG2aκ, IgG2aλ, IgG2bκ, IgG2cκ, IgMκ, IgMλ, and IgAκ). Materials Provided:
Preparation And Storage: Preparation And Storage Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze. The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated with HRP under optimum conditions, and unconjugated antibody and free HRP were removed.
Recommended Assay Procedures: Recommended Assay Procedures Materials Required but not Provided: 96-well ELISA-grade polystyrene or PVC microtiter plates; modular strips are also acceptable. Precision pipettes capable of delivering between 50 and 200 µL. 0.05% Tween-20 in PBS as washing solution. Reagent Preparation: 1.  Bring all reagents to room temperature (18 - 25°C) before use. 2.  Coating Buffer (1X PBS): Dilute required quantity of 10X PBS with deionized or distilled water, mix (50 ml for each plate). 3.  Blocking Buffer : Dilute required quantity of 10% BSA 1:10 with 1X PBS (35 ml for each plate). 4.  Dilute positive reference antigen mixture 1:50 with Blocking Buffer (1 ml for each plate). 5.  Dilute HRP-labeled mouse anti-rat Ig Ab 1:100 with Blocking Buffer (12 ml for each plate). 6.  Substrate Solution: Within 15 minutes prior to use, mix equal volumes of Substrate Reagent A and Substrate Reagent B (5 ml of each solution for each plate) in a clean glass tube or flask. Make only the amount required for each test. Discard any remaining working solution after use. Antibody Coating: Note: For optimal results, the required amounts of the purified coating antibodies should be diluted immediately before use, and the diluted antibodies should never be stored for a long period. Diluted aliquots should not be frozen. 7. Dilute an appropriate amount of each isotype-specific mouse anti-rat monoclonal antibody in Coating Buffer and deliver 100 µl of each reagent to applicable rows (see Figure 1 for suggested layout). 8. Tap plate gently to ensure even distribution of antibody solution on the bottom of wells. 9. Incubate, covered, at 37°C for 1 hour or at 4°C overnight. 10. Use washing solution (0.05% Tween-20 in PBS) to wash out plate contents using a plate washer or similar device and taking care not to cross-contaminate wells with different capture antibodies. Then shake out remaining contents, and blot excess on a clean paper towel. Repeat the wash 3X. 11. Add 200 µl of Blocking Buffer (see Reagent Preparation, Step 3) to each well, and incubate at room temperature for 30 minutes. 12. To prepare for Step 13, wash 3X, shake out Blocking Buffer, and blot dry. Sample Incubation: 13. Pipette 100 µl of each hybridoma culture supernatant to be tested to appropriate plate columns and incubate for 1 hour at room temperature. Positive controls (see Reagent Preparation, Step 4) should be included as desired; negative controls generally consist of parent myeloma culture supernatant (see Figure 1 for suggested layout). 14. To prepare for Step 15, wash 3X, shake out remaining contents, and blot dry. Enzyme Conjugate Incubation: 15. Pipette 100 µl of HRP-labeled mouse anti-rat Ig mAb solution (see Reagent Preparation, Step 5) to each well, and incubate at room temperature for 1 hour. 16. To prepare for Step 17, wash 6X, soaking the wells for 30 seconds to 1 minute on each wash. Thorough washing at this step is very important. Color Development: 17. Add 100 µl of prepared Substrate Solution (see Reagent Preparation, Step 6) to each well and incubate plate for 3 - 10 minutes at room temperature. Positive reaction wells will develop a greenish-blue color. Negative wells will be colorless. 18. Pipette 50 µl of Stop Solution to each well. Positive wells will become yellow. Plate Result Reading: 19. Read visually or spectrophotometrically at 450 nm. If wavelength correction is available, subtract A (570 nm) from A (450 nm). Figure 2 is an example of the visual readout for immunoglobulins of various isotypes. Danger: Substrate Reagent B (component 51-04141E) contains 33.05% methanol (w/w). Hazard statements Flammable liquid and vapour. Toxic if swallowed, in contact with skin or if inhaled. Causes damage to the central nervous system. Route of exposure: Oral. Precautionary statements Keep away from heat/sparks/open flames/hot surfaces. - No smoking. In case of fire: Use suitable extinguishing media to extinguish Wear protective gloves / eye protection. Wear protective clothing. Do not breathe mist/vapours/spray. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF exposed or concerned: Call a POISON CENTER/doctor. Store in a well-ventilated place. Keep container tightly closed. Danger: Stop Solution (component 51-04161E) contains 15.23% phosphoric acid (w/w). Hazard statements Causes severe skin burns and eye damage. Precautionary statements Wear protective gloves / eye protection. Wear protective clothing. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Dispose of contents/container in accordance with local/regional/national/international regulations. Warning: HRP Mouse Anti-Rat Ig (100x) (component 51-04127E) contains 0.004% (w/w) and 10% BSA Solution (component 51-04181E) contains 0.003% (w/w) of a CMIT/MIT mixture (3:1), which is a mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC No 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC No 220-239-6] (3:1). Hazard statements May cause an allergic skin reaction. Precautionary statements Wear protective gloves / eye protection. Wear protective clothing. Avoid breathing mist/vapours/spray. If skin irritation or rash occurs: Get medical advice/attention. IF ON SKIN: Wash with plenty of water. Dispose of contents/container in accordance with local/regional/national/international regulations.