BD, 566349, BD Horizon™ Brilliant Stain Buffer

Preparation And Storage: Preparation And Storage Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.
Recommended Assay Procedures: Recommended Assay Procedures Protocols for Multicolor Immunofluorescent Staining of Cells Using BD Horizon Brilliant Stain Buffer Multicolor Staining of Human Cell Samples in Tubes or 96-Well Plates Using Individual Staining Reagents 1. Add 50 μL of BD Horizon Brilliant Stain Buffer to all tubes or desired wells for the experiment Note: The 50 μL amount of Brilliant Stain Buffer per tube or per well does not depend on the final staining volume or amount of cells used per tube or number of BD fluorescent antibodies used in staining.  Although written for use with human cells, these protocols can readily be adapted for analyzing mouse cells or cells from other species, for example, by staining mouse cells at 4°C rather than at room temperature (RT). 2. Add each fluorescent reagent at the recommended volume per test (eg, 5 μL or 20 μL) and then proceed to either Protocol 1, 2, or 3. Protocol 1 for Staining Whole Blood Samples in Tubes a. Add 100 μL of human whole blood to each tube b. Vortex tube contents c. Incubate (30 min) the suspended cells protected from light at room temperature (RT) d. Add 2 mL of BD FACS™ Lysing Solution (Cat. No. 349202; 10 min) or BD Pharm Lyse™ Lysing Buffer (Cat. No. 555899; 15 min) per tube and incubate protected from light at RT e. Pellet cells by centrifugation (5 min) at 1400-1500 rpm f. Aspirate supernatant; add 2-3 mL of stain/wash buffer, eg, BD Pharmingen™ Stain Buffer (FBS) (Cat. No. 554656) or BD Pharmingen™ Stain Buffer (BSA) (Cat. No. 554657) g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm h. Aspirate the supernatant and resuspend cells in 500 μL of stain/wash buffer for flow cytometric analysis Protocol 2 for Staining Peripheral Blood Mononuclear Cells or Bulk Erythrocyte-lysed Whole Blood Samples in Tubes a. Add 100 μL of human cells to each tube b. Vortex tube contents c. Incubate (30 min) the suspended cells protected from light at room temperature (RT) d. Add 2 ml of stain/wash buffer per tube e. Pellet cells by centrifugation (5 min) at 1400-1500 rpm f. Aspirate supernatant; add 2-3 mL of stain/wash buffer g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm h. Aspirate the supernatant and resuspend cells in 500 μL of stain/wash buffer for flow cytometric analysis Protocol 3 for Staining Peripheral Blood Mononuclear Cells or Bulk Erythrocyte-lysed Whole Blood Samples in 96-well Plates Note:   When planning for staining in plates, the user must account for the volume of the BD Horizon Brilliant Stain Buffer used.  Although written for use with human cells, this 96-well plate-based protocol can readily be adapted for analyzing mouse cells or cells from other species. a. Add 50 μL of human cells to each well b. Incubate (30 min) protected from light at RT c. Wash by adding 100 μL of stain/wash buffer d. Pellet cells by centrifugation (5 min) at 1400-1500 rpm e. Aspirate supernatants f. Resuspend pelleted cells by adding 250 μL of stain/wash buffer g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm h. Aspirate supernatants i. Resuspend pelleted cells thoroughly with 150 μL stain/wash buffer by pipetting the suspended cells several times j. Transfer well contents to tubes and add additional stain/wash buffer to the tubes as desired for flow cytometric analysis Note: Alternatively, acquire samples for flow cytometric analysis from the plate directly Multicolor Staining of Human Cell Samples in Tubes or 96-Well Plates Using Cocktailed Staining Reagents Instead of adding staining reagents individually to each tube or well of a 96-well plate, it may be desirable to add cocktailed staining reagents, ie, mixtures of two or more fluorescent staining reagents. The following protocol provides an example of how to prepare a "per test" 5-Color Fluorescent Antibody Cocktail that already contains BD Horizon Brilliant Stain Buffer. Human Samples:  Pre-mixed Fluorescent Reagent Cocktails For each multicolor test of cocktailed fluorescent reagents: i)  Add 50 μL of BD Horizon Brilliant Stain Buffer per test ii)  Add each fluorescent reagent at the recommended volume per test (5 μL or 20 μL) iii)  Mix reagents (especially after adding BD Horizon Brilliant reagents) iv)  Store cocktail at 4°C protected from light if it is to be used later Note: Protected from light, fluorescent reagent cocktails containing more than one Brilliant Violet and/or Brilliant Blue reagent are best used within 24 hours after preparation when stored at 4ºC or within 4 hours when stored at room temperature. However, when more than one Brilliant Ultraviolet (BUV) reagent is in the cocktail, it is best used within 2 hours after preparation irrespective of storage temperature. Example of creating a 5-Color Fluorescent Antibody Cocktail containing 2 different Brilliant Violet™ Conjugates Final Volume per Test = 90 μL _____________________________________________________________________________________ Total Number of Tests Volume/Test (μL) 1 3 5 10 Brilliant Stain Buffer 50 50 150 250 500 Reagent 1 (BV) 5 5 15 25 50 Reagent 2 (BV) 5 5 15 25 50 Reagent 3 5 5 15 25 50 Reagent 4 5 5 15 25 50 Reagent 5 20 20 60 100 200 Total Volume 90 90 270 450 900 _____________________________________________________________________________________ Add desired volume of Reagent Cocktail (90 μL in this 5-color example) to all tubes or wells using the protocols for staining human cells described above. Compensation and Setup BD Horizon Brilliant Stain Buffer can be used in single color compensation controls using cells. The buffer is compatible with BD™ Compbeads, however, it has not been tested with compensation beads from other vendors. For the most accurate compensation, compensation controls created with either cells or beads should be exposed to BD Horizon Brilliant Stain Buffer for the same length of time as the corresponding multicolor panel. Additionally, the most accurate compensation will be created when BD Horizon Brilliant Stain Buffer is used in all compensation controls, including Brilliant polymer and non-polymer dyes.