Abcam, ab171535, Immunoassay Blocking (BSA Free)

Size: 50mL / 1000mL
Abcam’s Immunoassay Blocking (BSA Free) (ab171535) maintains the activity of antibodies and other biomolecules adsorbed or immobilized to solid substrates.
Key facts
Applications:ELISASee reactivity dataSee the reactivity data table below for information on validated species and application combinations.,
Form:LiquidSee storage information,
Storage buffer:pH: 7Constituents: 10% Sucrose, 1% Sodium chloride

Product details:
Abcam’s Immunoassay Blocking (BSA Free) (ab171535) maintains the activity of antibodies and other biomolecules adsorbed or immobilized to solid substrates. It is easily incorporated into most assay protocols as the blocking solution, and minimal incubation is required. For blocking nonspecific sites on hydrophobic substrates, incubate for as little as five minutes and then proceed with your assay. Longer incubation times, while not necessary, are also not detrimental. For simultaneous blocking and stabilizing, apply ab171535 and incubate. Remove excess solution and completely dry the component. For maximum shelf life, store the stabilized component in a sealed container with desiccant.
To Stabilize Adsorbed or Immobilized Proteins on Microtiter Plates/Strips
1. For optimal stability and performance, use ab171535 at 100% concentration
2. Immobilize or adsorb the primary protein (antibody or antigen) according to the procedure optimized in your laboratory; wash adequately to remove excess or weakly bound material
3. Immediately after washing, add ab171535 to allow interaction with the entire protein-coated surface; do not let coated components dry before adding ab171535 since drying contributes to the loss of protein activity
4. Incubate for five minutes to two hours at room temperature; for most assays, ab171535 can replace the blocking solution
5. Remove or aspirate ab171535, but do not wash
6. To dry components for long-term storage, we recommend one of the following methods:
– Option 1. Place plates in a humidity-controlled chamber until dry (2-24 hours)
– Option 2. Dry 2 -24 hours in a sealed desiccated container, such as a cabinet, jar, or plastic bag containing calcium sulfate or silica gel desiccant in amounts adequate for the size of the container, or
– Option 3. Dry plates at 30°C-40°C in a vacuum oven for 2-4 hours
NOTE: Drying times should be optimized for each application
7. Immediately package the dried product in an airtight, moisture-proof container with a desiccant; this is especially important with the final product is stored in a humid environment or refrigerated where condensation is likely to occur

Properties and Storage Information:
Shipped at conditions-Ambient - Can Ship with Ice, Appropriate short-term storage conditions-Ambient, Appropriate long-term storage conditions-Ambient