Sartorius, 5105307HV--LX--C, Sartolon | Sartoscale 25 | 0.2µm | 6pc.

Effective Filtration Area: 4.5 cm²
Pore Size: 0.45 µm prefilter | 0.2 µm final filter
Membrane Material: Polyamide (Nylon)
Connectors: Inlet: Female luer lock | Outlet: Male luer slip

Featuring a unique hydrophilic nylon (polyamide) membrane, Sartolon filters offer mechanical strength and broad chemical compatibility. They are the ideal choice for sterile filtration of solvents and oily formulations where chemical stability is needed.
In addition to its wide range of applications, Sartolon filters provide outstanding total throughput and flow rates due to their heterogeneous double-nylon layer. The enhanced filtration performance guarantees process efficiency, reduces filtration costs and leads to short filtration cycles.
Main Applications
Solvents & Oily Formulations
Antibiotics
Large Volume Parenterals
Bulk Pharmaceutical Chemicals
ADCs
Benefits
High chemical compatibility for the filtration of solvents
High filter capacity by in-built pre-filter (double-layer construction)
Excellent performance for oily formulations
Highly economic solution e.g. for antibiotics processes
Membrane
Sartolon uses a double-layer membrane made of polyamide. The "built-in pre-filtration" results in the highest possible total flow, so that a filter change during filtration is avoided. The membrane is reinforced with a PET fleece.
Cost savings:
The use of disposable filter elements eliminates the need to invest in stainless steel filter housings. Additional costs for housing cleaning and cleaning validation are eliminated.
Flexibility
Sartolon filters are available in a wide range of filtration areas from 4.5 cm² up to 2.4 m² and with a variety of commonly used connections to ensure easy integration into your process regardless of batch size.
Scale Up:
Consistent and predictable scale-up and scale-down procedures can be safely performed because all Sartolon filter elements are manufactured with the same membrane type, support fleeces and construction materials.
Sterilization
Sartolon filters have been developed for sterilization using autoclaving at 134°C | 2bar.
Quality:
Every single element is tested for integrity to meet the highest quality requirements.
Documentation:
Sartolon filters have been designed, developed and produced in accordance with the ISO 9001 certified quality management system. A validation manual is available in accordance with regulatory requirements.

Specifications
Applications:
Application: Filtration of antibiotics and organic solvents
Modality: Buffer & Auxiliaries Filtration
Scale: Product Development | Material Screening Filters

Compliance Information:
Extractables: The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".

Connections (Physical):
Connector Inlet: Female Luer Lock
Connector Outlet: Male Luer Slip
Connector(s): Inlet: Female Luer | Outlet: Male Luer

Dimensions:
Filter Size: 4.5 cm²

General Specifications:
Capsule/Cartridge Format: Sartoscale 25

Materials of Construction:
Housing Material: Polypropylene (PP)
Material o-ring | seal: Silicone
Membrane Material: Polyamide (PA/NY)
Support Fleece: Polypropylene (PP)

Operating Conditions:
Maximum Differential Pressure: 20 °C: 5 bar, 80 °C: 2 bar

Physicochemical Information:
Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Pore Size Final-filter: 0.2 µm
Pore Size Pre-filter: 0.45 µm

Product Information:
Brand: Sartolon
Pack Size: 6
Type: Sartoscale 25 | Connectors: Luer

Sterility/Purity:
Delivery Condition: Non sterile - Autoclavable
Sterilization Method: Autoclavable

Usage Protocols:
Sterilization Procedures: Autoclaving: 1 cycle at max. 134 °C, 2 bar | 29 psi, 30 min.