Cobetter, AAFBB207SP, Safesure AFB Sterilizing-Grade Filter Cartridge 0.2μm, Gas Filtration

Check this product with a package size of A-Standard Cartridge / 0.2μm / 20 inch on Iright. Specifications

Materials
Membrane
Hydrophobic Polytetrafluoroethylene(PTFE)
Support
Polypropylene(PP)
Core/Cage/End Cap
Polypropylene(PP)
Cartridge End Cap Inserts
Polybutylene terephthalate (PBT)
Cartrdige End Cap O-rings
Silicone/EPDM/Fluoroelastomer/PFA encapsulated O-rings
Pore Size
0.2 μm
Filtration Area
A-Standard Cartridge (10")-0.80m²
Operating Conditions
Max. Operating Temperature
80°C
Max. Differential Pressure (Forward)
A-Standard Cartridge:0.69 MPa @ 25°C0.40 MPa @ 60°C0.24 MPa @ 80°C
Max. Differential Pressure (Reverse)
0.30 MPa @25°C0.10 MPa @ 80°C
Sterilization Option
A-Standard Cartridge
Can be steam sterilized for 30 minutes at 145 °C in forward direction(＜30kPa) with 100 cycles plus in reverse direction(＜10kPa), 150 cycles in total;Can be autoclaved 200 cycles for 30 minutes at 130°C
Quality Standards
Integrity
100% Integrity testing
Traceability
Each filter with a unique serial number
QMS
ISO 9001:2015
Package
Pack Size
1/pk
Packaging
Double PE bag

Features
PTFE is inherently hydrophobic and further processed for even more hydrophobic, maintaining sterilizing capacity in both unwet and wet condition
Oleo-phobic
High retention rates, low-pressure differential
Use of heat-resistant thickened PP as core, better heat resistance and pressure resistance
Heat resistance, can be steamed in line and autoclaved repeatedly
Applications
Vent filter for fermentation, storage tanks
Sterile filtration for compressed air, oxygen, nitrogen
Single-use system application
Regulatory Compliance
Effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.