Cobetter, ACHT06207SP, Excesal CHT Clarification Filter Cartridge

Check this product with a package size of A-Standard Cartridge / 0.6μm / 20 inch on Iright. Clarification Filter with High Dirt-Holding Capacity.
Specifications

Materials
Membrane
Polypropylene(PP)
Support
Polypropylene(PP)
Core/Cage/End Cap
Polypropylene(PP)
Cartridge End Cap Inserts
Polybutylene terephthalate (PBT)
Cartrdige End Cap O-rings
Silicone/EPDM/Fluoroelastomer/PFA encapsulated O-rings
Filtration Area
A-Standard Cartridge(10") 0.2μm-0.20m²A-Standard Cartridge(10") 0.5μm-0.28m²A-Standard Cartridge(10") 1.0μm-0.25m²A-Standard Cartridge(10") 2.0μm-0.25m²A-Standard Cartridge(10") 5.0μm-0.25m²A-Standard Cartridge(10") 10μm-0.25m²A-Standard Cartridge(10") 20μm-0.28m²A-Standard Cartridge(10") 70μm-0.28m²
Operating Conditions
Max. Operating Temperature
80°C
Max. Differential Pressure (Forward)
A-Standard Cartridge:0.69 MPa @ 25°C0.40 MPa @ 60°C0.24 MPa @ 80°C
Max. Differential Pressure (Reverse)
0.30 MPa @25°C0.10 MPa @ 80°C
Sterility
Delivery Condition
Non-Sterile
A-Standard Cartridge
Can be steam sterilized for 30 minutes at 125 °C with 20 cycles (< 30 kPa);Can be autoclaved 20 cycles for 30 minutes at 125°C
Quality Standards
Traceability
Each filter with a unique serial number
QMS
ISO 9001:2015
Package
Pack Size
1/pk
Packaging
Double PE bag

Features
Gradient pore structure to significantly enhance dirt-holding capacity
A multi-layer structure with increasing precision
Capable of graded particle retention, extending the filter's service time
Exceptional particle retention efficiency
Applications
Fermentation broth
Pre-filtration blood products/serums
Pre-filtration of colloids/viscous liquids
Regulatory Compliance
Effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.