Cobetter, C01BBCHV04A1P, Greclary CHV Clarification Bricap C Series Capsule Filters

Check this product with a package size of C01-80cm² / 0.45μm / 6-13 mm (1/4"-1/2") Stepped Hose Barb on Iright. High Throughput Filter.
Specifications

Materials
Membrane
Glass Microfiber (GF)
Support
Polypropylene (PP)
Core/Cage/End Cap
Polypropylene (PP)
Capsule Housing
Polypropylene (PP)
Capsule Vent O-rings
Silicone
Filtration Area
C01-80cm²C02-200cm²C03-300cm²
Operating Conditions
Max. Operating Temperature
80°C
Max. Differential Pressure (Forward)
0.55 MPa @25°C0.10 MPa @80°C

Max. Differential Pressure (Reverse)
0.21 MPa @25°C
Quality Standards
Traceability
Each filter with a unique serial number
QMS
ISO 9001:2015
Sterility
Delivery Condition
Non-sterile
Sterilization Method
Can be autoclaved 20 cycles for 30 minutes at 125°C (Can not be steam sterilized in-line)
Package
Pack Size
1/pk
Packaging
Double PE bag
*Note: Cobetter also provides filters with different sterilization methods:
Pre-sterilized filters by autoclaved for 30 minutes at 121°C (Packed in sterile breathable bags).
Features
Ultra-fine glass fibers as the filtration medium
Rigid fiber material, suitable for colloid filtration
High dirt-holding capacity and high retention rate
Low initial pressure drop, high flow rate, and long service time
Applications
Fermentation broth
Pre-filtration blood products/serums
Pre-filtration of colloids/viscous liquids
Regulatory Compliance
Effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.