Cobetter, C03FFPAFHA1P, Purcise PAF Prefiltration Bricap C Series Capsule Filters

Check this product with a package size of C03-660cm² / 0.65μm / 31 mm (1 1/4") Sanitary Flange on Iright. Hydrophilic Filter with High Flow Rate.
Specifications

Materials
Membrane
Hydrophilic Polyethersulfone(PES)
Support
Polypropylene(PP)
Core/Cage/End Cap
Polypropylene(PP)
Capsule Housing
Polypropylene(PP)
Capsule Vent O-rings
Silicone
Filtration Area
C01-180cm²C02-420cm²C03-660cm²
Operating Conditions
Max. Operating Temperature
80°C
Max. Differential Pressure (Forward)
0.55 MPa @25°C0.10 MPa @80°C

Max. Differential Pressure (Reverse)
0.21 MPa @25°C
Quality Standards
Integrity
100% Integrity testing
Traceability
Each filter with a unique serial number
QMS
ISO 9001:2015
Sterility
Delivery Condition
Non-sterile
Sterilization Method
Can be autoclaved 25 cycles for 30 minutes at 130°C (Can not be steam sterilized in-line)
Package
Pack Size
1/pk
Packaging
Double PE bag
*Note: Cobetter also provides filters with different sterilization methods:
1. Gamma compatible filters: can be sterilized by gamma irradiation at 25-45 kGy or can be autoclaved 5 cycles for 60 minutes at 126 °C. (Can not be steamed in-line);2. Pre-sterilized filters by gamma irradiation at 25-45 kGy (Gamma-sterilized products cannot be re-sterilized with gamma irradiation or steam sterilization);3. Pre-sterilized filters by autoclaved for 30 minutes at 121°C (Packed in sterile breathable bags).
Features
Reliable retention of bacteria and particles
Extensive chemical compatibility
High flow rate, high throughput
Applications
Buffer Filtration
Regulatory Compliance
Effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.