Cobetter, SFMCA-2233, Orange Hydrophilic CA Syringe Filters Non-sterile 100pcs/pk

Check this product with a package size of 33mm / 0.22μm / 100pcs/pk on Iright. Cobetter CA syringe filters are chemically compatible with a range of samples and suitable for the filtration of aqueous solutions, which combine fast flow rate and very low absorption.
Specifications

Connections
Inlet
Female Luer Lock
Outlet
Male Luer Slip
Materials
Housing
PP
Membrane
Cellulose Acetate
Wettability
Hydrophilic
Physical Properties
Pore Size
0.22 μm, 0.45 μm
Filter Diameter

13mm
25mm
33mm

Filtration Area

0.72cm²
3.4cm²
4.5cm²

Maximum Operating Pressure

6bar
3bar
2bar

pH Range
4.0 – 8.0
Sterility
Delivery Condition
Nonsterile
Sterilization Method
Not Recommended
Package
Pack Size
100pcs
Packaging
Bulk packed
Features
High porosity, low resistance
Fast filtration rate
Extra low non-specific binding
Available pre-filters produce lower back pressure
Solvents to minimize leaching of extractable impurities features
Applications
Filtration of tissue culture media
Filtration of sensitive biological samples
Protein-based samples with low non-specific binding
For sample analysis that requires minimizing sample loss
Select by Volume

Sample Volume
Filter Diameter
Filtration Area
Hold-up Volume
< 10mL
13mm
0.72 cm²
< 25μl 
10mL to 100mL
25mm
3.4 cm²
 < 100μl
100mL to 200mL
33mm
4.5 cm²
 < 125μl
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.