Cobetter, SFMMCE-8013, Orange Hydrophilic MCE Syringe Filters Non-sterile 100pcs/pk

Check this product with a package size of 13mm / 0.8μm / 100pcs/pk on Iright. The membrane material of MCE syringe filter is mixed cellulose ester which is composed of cellulose acetate and nitrocellulose, and the surface is smoother and more uniform. Suitable for filtration of water-based solvents, not resistant to strong acid, strong alkali solutions, and most organic solvents. Ideal for aqueous sample filtration that needs higher flow rate and larger volume.
Specifications

Connections
Inlet
Female Luer Lock
Outlet
Male Luer Slip
Materials
Housing
PP
Membrane
 Mixed Cellulose Esters
Wettability
Hydrophilic
Physical Properties
Pore Size
0.22 μm, 0.45 μm, 0.8 μm
Filter Diameter

13mm
25mm
33mm

Filtration Area

0.72cm²
3.4cm²
4.5cm²

Maximum Operating Pressure

6bar
3bar
2bar

pH Range
4.0 – 8.0
Sterility
Delivery Condition
Nonsterile
Sterilization Method
Not Recommended
Packagestrong>
Pack Size
100pcs
Packaging
Bulk packed
Performance

Filter Diameter
Pore Size
Flow Rate (mL/min@0.21Mpa,20°C, 210kPa, 30psi)
Bubble Point(MPa, Water)
13mm
0.22μm
64
≥0.3
0.45μm
88
≥0.2
0.8μm
154
≥0.1
25mm
0.22μm
208
≥0.3
0.45μm
409
≥0.2
0.8μm
662
≥0.1
33mm
0.22μm
338
≥0.3
0.45μm
658
≥0.2
0.8μm
846
≥0.1

Features
High porosity and large water flux
Good interception effect
Excellent biocompatibility
High protein binding
Cannot be used for protein extraction
Applications
Sterilizing filtration of biological solutions
Clarification or sterilization of aqueous solutions
Particulate analysis and removal
Air monitoring and microbial detection
Tissue culture, biochemical analysis filtration
Solvent filtration which used in HPLC
Select by Volume

Sample Volume
Filter Diameter
Filtration Area
Hold-up Volume
10mL
13mm
0.72 cm²
25μl
10mL to 100mL
25mm
3.4 cm²
 < 100μl
100mL to 200mL
33mm
4.5 cm²
 < 125μl
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.