Cobetter, SFUGF-4533, Hydrophilic GF Syringe Filters Non-sterile 100pcs/pk

Check this product with a package size of 33mm / 0.45μm / 100pcs/pk on Iright. Cobetter glass fiber syringe filters are effective for the filtration of highly viscous samples. They have high compatibility with organic solvents, as well as strong acids and alkalis. The housing is made of premium polypropylene which has a wide chemical compatibility. The over-molded design ensures higher operating pressures. Luer lock inlet/outlet offers a leak-tight syringe connection.
Specifications

Connections
Inlet
Female Luer Lock
Outlet
Male Luer Slip
Materials
Housing
PP
Membrane
Glass Fiber
Wettability
Hydrophilic
Physical Properties
Pore Size
0.22μm, 0.45μm, 1.0μm
Filter Diameter

13mm
25mm

Filtration Area

0.72cm²
3.4cm²

Maximum Operating Pressure

6bar
3bar

pH Range
2.0 – 11.0
Sterility
Delivery Condition
Nonsterile
Sterilization Method
Not Recommended
Package
Pack Size
100pcs
Packaging
Bulk packed
Features
High dirt holding capacity
High throughputs
Excellent chemical compatibility
Applications
Clarification of environmental, industrial and wastewater samples
Filtration of viscous solutions
Prefiltration of viscous serums and tissue media samples before analysis
Prefiltration of cell media separations
Filtration of aggressive solvents and reagents
Select by Volume

Sample Volume
Filter Diameter
Filtration Area
Hold-up Volume
< 10mL
13mm
0.72 cm²
< 25μl 
10mL to 100mL
25mm
3.4 cm²
<100μl
100mL to 200mL
33mm
4.5 cm²
< 125μl
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.