Cobetter, SP3SSAFBBV1P, Safesure AFB Sterilizing-Grade Brisip SP3 SIP Capsule Filter, Gas Filtration

Check this product with a package size of 0.2μm / 38 mm (1 1/2") Sanitary Flange / Both using 13 mm (1/2") Sanitary Flange on Iright. Specifications

Materials
Membrane
Hydrophobic Polytetrafluoroethylene(PTFE)
Support
Polypropylene(PP)
Core/Cage/End Cap
Polypropylene(PP)
Capsule Housing
Polyetherimide (PEI)
Capsule Port Insert
316L Stainless Steel
End Cap O-rings
Silicone
Vent O-rings
Silicone
Inlet/Outlet
38 mm (1 1/2") Sanitary Flange
Pore Size
0.2 μm
Filtration Area
0.15m²
Operating Conditions
Max. Operating Temperature
80°C
Max. Differential Pressure (Forward)
0.69 MPa @ 40 °C0.40 MPa @ 60 °C0.24 MPa @ 80 °C

Max. Differential Pressure (Reverse)
0.30 MPa @ 40 °C0.10 MPa @ 80 °C
Sterilization Option
SIP
Can be SIP 10 cycles for 30 min at 142 °C (Differential Pressure < 30 kPa).
Autoclavable
Can be autoclaved 50 cycles for 30 min at 135 °C
Quality Standards
Integrity
100% Integrity testing
Traceability
Each filter with a unique serial number
QMS
ISO 9001:2015
Package
Pack Size
1/pk
Packaging
Double PE bag

Features
PTFE is inherently hydrophobic and further processed for even more hydrophobic, maintaining sterilizing capacity in both unwet and wet condition
Oleo-phobic
High retention rates, low-pressure differential
Use of heat-resistant thickened PP as core, better heat resistance and pressure resistance
Heat resistance, can be steamed in line and autoclaved repeatedly
Applications
Vent filter for fermentation, storage tanks
Sterile filtration for compressed air, oxygen, nitrogen
Single-use system application
Regulatory Compliance
Effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.