Cobetter, STT0816150N, Lifemeta™ STT Platinum Cured Silicone Tubing 15m/pk

Check this product with a package size of 1/32"(0.8mm) ID x 5/32"(4.0mm) OD x Wall 1.6mm - 13# / 15 m / Without Logo on Iright. Cobetter Lifemeta™ STT platinum-cured silicone tubing is designed for efficient fluid transfer. The product is manufactured using high-purity medical-grade raw materials through advanced extrusion equipment and molding tools, and can withstand extreme temperatures, a wide range of acid-alkali salts, organic solvents, and radiation, while also exhibiting good resilience and tear resistance, suitable for use in peristaltic pumps. The Lifemeta™ STT tubing is semi-transparent with a smooth internal surface, providing a reliable solution for low-adsorption applications.
Specifications

Brand
Tubing Brand
Lifemeta™  STT
Physical Properties
Color
Translucent
Material
Silicone (Platinum-Cured)
Length
15m
Durometer Hardness (Shore A)
60 ± 5
Burst Strength
0.4 - 0.9 MPa
Tensile Strength
7.05 - 8.96 MPa
Elongation at Break
378 - 443%
Vacuum Resistance
>30 kPa
Temperature Range
-51 °C to 232 °C
Biological Safety
Endotoxins
<0.25 EU/ml
Bio-compatibility
Meet the requirement of USP<87> In Vitro Cytotoxicity Test;Meet the criteria of the USP<88> Biological Reactivity Test for Class VI-121°C plastics
Sterilization Option
Gamma-irradiation
25-45 kGy in a sterile package and can not be re-sterilized.
Autoclave(121°C)
25 cycles, 30min
Package
Pack Size
1/pk
Delivery Condition
Nonsterile
Packaging
Coil packaged in double PE bag
Features
High purity, medical-grade raw materials
Continuous monitoring of the production process
Semi-transparent tubing with a smooth internal surface
Resistant to various acids, alkalis, salts, and organic solvents
Excellent tensile strength to ensure the toughness of the tubing
Applications
Culture media and buffers preparation
Supply feed liquids to bioreactors and cultivation systems
Upstream and downstream transfer of base liquids
Integration of single-use assemblies systems
Laboratory fluid transfer applications
Food processing applications
Regulatory Compliance
Particulate matter in the product eluent meets the requirements in USP <788> for large volume parenterals.
Aqueous extraction contains < 0.25 EU/mL as determined by Amebocyte Lysate, USP <85>.
Meet the requirement of USP <87> In Vitro Biological Reactivity Test.
Meet the criteria of the USP <88> Biological Reactivity Test for Class VI plastics.
Meet the requirement of ISO 10993-4 In Vitro Hemolytic Test.
The fluid contact component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.
Products do not contain animal derived components and are free from TSE risk.
These products are manufactured in a facility which adheres to ISO™ 9001:2015 Practices.
Related Articles
1. Cobetter High-Performance Lifemeta STT Platinum Cured Silicone Tubing Q: What's the application of STS platinum-cured silicone tubing?
Cobetter STS platinum-cured silicone tubing is designed to facilitate fluid transfer in many pharmaceutical and biopharmaceutical applications.
Q: How many internal diameters are available for platinum-cured tubings?
Cobetter STS platinum-cured silicone tubing is available in 7 different internal diameters ranging from 1/8" (3mm) to 3/4" (19mm).
Q: What's the sterility method?
Gamma irradiation and autoclave.
Q: Cobetter’s custom tubing assemblies are non-sterile, can customers sterilize it by themselves?
1. Yes, customers can sterilize only the tubing assemblies and the connectors, excluding any bags.
2. When customers sterilize the connectors and tubing, all ports should be opened, such as connector plugs and blind caps on clamps. After sterilization is completed, they can be connected and used.
3. Especially attention shall be taken that you will need to add an additional cable tie to offset the leakage risk caused by the high-temperature deformation of the original cable tie after off-line sterilization.
Q: What is the recommended length to be reserved for thermoplastic tubing for aseptic connection and aseptic sealing?
Cobetter's aseptic connection machine and aseptic sealing machine can achieve aseptic connection and disconnection in general environments. It is recommended to reserve a length of 15cm for each connection and disconnection.
Q: Can silicone tubing and pump tubing be used for organic solvent solutions?
Silicone tubing is not resistant to organic solvents.
For pump tubing, we need to confirm specific details of the process, such as pipe diameter, operating pressure, duration of use, and the acidity/alkalinity of the fluid being pumped. If organic solvents are involved, it is recommended not to choose silicone tubing and instead opt for pump tubing that is resistant to organic solvents.
Q: Will a single-use system that has been irradiated have any impact on the product? Can irradiation residues be detected in the irradiated items?
No. The irradiation dose is validated to ensure sterilization effectiveness. Moreover, the irradiation process only involves energy absorption and does not involve direct contact with the radiation source. Therefore, there are no issues of irradiation residues in the disposable system.
Q: Are the integrity testing of bags and tubings conducted together?
The pressure resistance of the bags and tubings is different. The bag can withstand a pressure of 0.02 kg. For the bag, we apply a gas pressure of around 0.015 bar or 0.02 bar after clamping with bag clamps. After a certain period, we measure the pressure decay. The tubing and fittings can withstand pressure of up to approximately 2 bar, and we apply a pressure of 1.6 or 1.7 bar to measure the pressure decay.
Q: How do the drawings correspond to the product packaging?
Each product shown on a drawing represents the product within one package. If separate packaging or simultaneous use of multiple products is required, they can be split/integrated into a single drawing.