Cobetter, U13CPPMDSA1P, High Throughput Hydrophilic 0.22/0.45μm PVDF Syringe Filters with Prefilter, Autoclavable, Individually Packed 100pcs/pk

Check this product with a package size of 13mm / 1.0/0.45μm / 100pcs/pk on Iright. Cobetter hydrophilic PVDF high throughput syringe filters are constructed of polypropylene housing with a prefiltration membrane with pore sizes ranging from 0.45μm to 1.0μm. This construction prevents the build-up of back pressure typically caused by the blocking of an unprotected membrane.
Cobetter high throughput syringe filters can process three times more sample volume than standard syringe filters and have extended lifespan.
The hydrophilic treatment PVDF membrane achieves both low protein binding and a fast flow rate simultaneously, making it suitable for applications where high protein recovery is desired.
These autoclavable syringe filters can withstand autoclaving at 121°C (up to a maximum of 130°C) for 30 minutes, and this process can be repeated up to 20 times. However, we recommend single-use for optimal performance. If customers wish to sterilize and reuse them, a thorough impact assessment is necessary.
Specifications

Connections
Inlet
Female Luer Lock
Outlet
Male Luer Slip
Materials
Housing
PP
Membrane
PVDF
Wettability
Hydrophilic
Physical Properties
Double Layer
0.45/0.22 μm
1.0/0.45 μm

Filter Diameter

13mm
25mm
33mm

Filtration Area

0.72cm²
3.4cm²
4.5cm²

Maximum Operating Pressure

6bar
3bar
2bar

pH Range
1.0 – 8.0
Sterility
Delivery Condition
Non-sterile
Sterilization Method
Autoclave at 121ºC (130ºC max) for 30 minutes
Package
Pack Size
100pcs
Packaging
Individually packed
Features
13, 25 and 33 mm diameter syringe filters
Double-layer membrane with graduated pore size for excellent loading capacity with fast flow rates
Exceptionally low protein binding
Broad chemical compatibility but not resist strong alkali (pH range: 2-10)
Autoclavable
Individually packed, Eliminates sample contamination
Requires less hand pressure
Applications
Hydrophilic Polyvinylidene difluoride (PVDF) for biological solutions
Protein/enzyme solutions
Mild organic solutions
Routine sample preparation
Environmental samples
Select by Volume

Sample Volume
Filter Diameter
Filtration Area
Hold-up Volume
< 10mL
13mm
0.72 cm²
< 25μl 
10mL to 100mL
25mm
3.4 cm²
< 100μl
100mL to 200mL
33mm
4.5 cm²
< 125μl
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.