New England Biolabs, M0493L, Q5® Hot Start High-Fidelity DNA Polymerase

This product is available in a glycerol-free format. Applications Hot Start PCR,, Long Range PCR,, Fast PCR, Specification Materials Required but not Supplied Deoxynucleotide (dNTP) Solution Mix (NEB #N0447) Nuclease-free Water (NEB #B1500) Unit Definition One unit is defined as the amount of enzyme that will incorporate 10 nmol of dNTP into acid insoluble material in 30 minutes at 74°C. Heat Inactivation No Unit Assay Conditions 25 mM TAPS-HCl (pH 9.3 @ 25°C), 50 mM KCl, 2 mM MgCl 2 , 1 mM β-mercaptoethanol, 200 μM dNTPs including [ 3 H]-dTTP and 15 nM primed M13 DNA. FAQ Q: What are the advantages of using Q5® High-Fidelity DNA Polymerase? A: High Fidelity means low error rates, more accurate sequences Q5 High-Fidelity DNA Polymerase has an ultra-low error rate (<1 error per million bases) due to strong proofreading (3´-5´) exonuclease activity, making it the preferred polymerase for all PCR applications requiring greater accuracy (high sequence accuracy) or the amplification of difficult (from high AT to high GC) templates. High Processivity means longer amplicons, faster Q5 High-Fidelity Polymerase is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity, and reliability of performance. This increased fidelity and processivity allows for more accurate and longer template (up to 10 kb gDNA, 20 kb plasmid) amplification. Learn More Enhanced fidelity The fidelity of a DNA polymerase is defined by its ability to accurately replicate a template. A critical aspect of fidelity is the ability of the DNA polymerase to read the template strand, select the appropriate nucleoside triphosphate and insert the correct nucleotide at the 3´ end in the polymerase catalytic domain, such that canonical Watson-Crick base pairing is maintained. High-fidelity polymerases have a significant binding preference for the correct versus the incorrect nucleotide triphosphate during polymerization. A polymerase's error rate is the rate of misincorporation of an incorrectly matched nucleotide. If an incorrect nucleotide does bind in the polymerase active site, incorporation is slowed due to the sub-optimal architecture of the active site complex. This time provides the opportunity for the incorrect nucleotide to dissociate before incorporation, thereby allowing the process to start again (and for a correct nucleotide triphosphate to bind). In addition to effective discrimination for correct over incorrect nucleotide incorporation in the polymerase active site, some DNA polymerases possess proofreading (3´→5´) exonuclease activity. If after some time the correct nucleotide is not incorporated, the 3´ end of the growing DNA chain is moved into this 3´→5´ exonuclease domain where the phosphodiester bond between the incorrect nucleotide and the previous nucleotide is broken, releasing the incorrect nucleotide and permitting the chain to move back into the polymerase domain, where polymerization can continue with the correct nucleotide. Fidelity is important for applications in which the DNA sequence must be correct after amplification, including: Cloning/subcloning from in vitro amplified material (PCR, RCA, etc.) for protein expression or gene studies SNP analysis by cloning and sequencing RNA analysis by RT-PCR Next-generation sequencing Fidelity is less important: If the PCR amplified product is directly sequenced by Sanger sequencing (without an intervening cloning step), where the signal is an average of the input amplicons. However, it is more important for next generation and single molecule sequencing techniques. In diagnostic applications where the read-out is the presence or absence of a product. Enhanced processivity by fusion to the Sso7d dsDNA binding protein Processivity is the ability of a polymerase to replicate DNA without dissociating from the template and is measured by the average number of nucleotides incorporated per binding event. Sso7d binds to the dsDNA, stabilizing the fusion-polymerase to the template, even when the template is difficult. Sso7d (from Sulfolobus solfataricus) is a 7 kDa, sequence-independent dsDNA binding protein. Sso7d-fusion polymerases allow reduced PCR extension times (limiting nonspecific amplification) and permits the use of less enzyme (cost effective, less storage buffer components, like glycerol) by increasing polymerase processivity. For example, Pfu (Pyroccocus furiosis) polymerase (an Archaeal Family B polymerase, like Q5®) alone exhibits a processivity score of 0.84 with an average primer extension length of 6 nucleotides, while the fusion protein Pfu-Sso7d exhibits higher processivity with a score of 0.98 and an average extension length of 55 nucleotides (3). (1) Johnson, K. A. (2010) Biochimica et Biophysica Acta, 1804, 1041–1048. PMID: 20079883 (2) Joyce, C. M., & Benkovic, S. J. (2004) Biochemistry, 43, 14317–14324. PMID: 15533035 (3) Wang, Y. et al. (2004) Nucleic Acids Res, 32, 1197-1207. PMID: 14973201 Q: What are the differences between the numerous Q5® Polymerase products available? A: Stand-Alone Enzyme formulations (NEB #M0491, #M0493) are recommended for flexible PCR setup and for high GC content templates (by adding the High GC Enhancer to the reaction). Master Mix formulations (NEB #M0492, #M0494) offer the most convenience by containing enzyme, Mg2+, dNTPs, and all necessary buffer components to support robust amplification - only template and primers need to be added. Hot Start formulations (NEB #M0493, #M0494) inhibit the activity of the enzyme, allowing for convenient room temperature reaction set up, and are suitable for all PCR applications requiring greater accuracy, high specificity or the amplification of difficult or long targets. For more information on Hot Start technology, click here. NEBNext® Q5 formulations (NEB #M0541, #M0543, #M0544) have been specifically optimized to limit GC bias during the amplification of NGS libraries. M0544 is the suggested master mix for NGS applications. The Q5 Blood Direct 2X Master Mix (NEB #M0500) is specially formulated for blood samples without the need for a purification step. It is a Hot Start enzyme. Q5 polymerase cannot read through or incorporate uracil, but Q5U® Hot Start High-Fidelity DNA Polymerase (NEB #M0515) can. Use it with uracil-containing, bisulfite-converted, deaminated, or damaged DNA templates. Carryover contamination prevention can be utilized with Q5U and dUTP/dTTP. It is a Hot Start enzyme. Q: My results are not as expected. Where can I find troubleshooting help? A: Nonspecific amplification, no amplification, wrong product size Curious result? Consult our PCR Troubleshooting Guide after your reaction to identify potential causes of unexpected results and solutions. More details on reaction conditions and setup optimization can be found in our Guidelines for PCR Optimization with Thermophilic DNA Polymerases and this blog post. Technical Support is always happy to work with you to troubleshoot your PCR. If you would like assistance, you can: Email us at info@neb.com Call Technical Support at (800)-0632-7799, available Monday through Friday, 9:00AM - 6:00PM EST Fill out this webform Failure to amplify a target greater than 5 kb If you are struggling to amplify a target that is greater than 5 kb, try some of these tips: We recommend using Q5®, Phusion®, or LongAmp® polymerases If using Q5, try decreasing the final primer concentration to 150-300nM Stand-alone enzyme + buffer formulations allow more flexibility in reaction optimization than master mixes Use more template Treat the purified template gently as not to shear it Optimize enzyme concentration by testing a titration of enzyme in the reaction (0.25-2 units/50μl reactions) Increase the number of cycles Lengthen extension time to 40s/kb Smearing on an agarose gel When PCR conditions are not optimal, a smear or high level of background is often observed. Try one or more of the following suggestions: Use less enzyme Decrease the extension temperature to 3°C below the extension temperature recommended by the specific product protocol For example, the OneTaq® protocol recommends a 68°C extension temperature; try 65°C. Raise the annealing temperature Try 2-step cycling protocols If there is an illuminated halo around the well in addition to smearing from the well, use less template. Q: What ends will my PCR products have? A: APPLICATION POLYMERASE PRODUCTS PCR PRODUCT ENDS High fidelity PCR Q5® polymerases Blunt Phusion® polymerases Blunt Routine & Specialty PCR OneTaq® polymerases 3'A/blunt Taq polymerases 3'A LongAmp® polymerases 3'A/blunt Hemo KlenTaq Polymerase 3'A Isothermal amplification Bst polymerases 3'A Bsu Polymerase 3'A phi29 Polymerase Blunt DNA manipulation T7 DNA Polymerase Blunt E. coli DNA Polymerase I Blunt DNA Polymerase I, Large (Klenow) Fragment Blunt Klenow Fragment (3′-5′ exo-) 3'A T4 DNA Polymerase Blunt Vent® Polymerase Blunt Vent® (exo-) Polymerase 3'A Deep Vent® Polymerase Blunt Deep Vent® (exo-) Polymerase 3'A For more details about our polymerases, including exonuclease activities and applications, please visit our DNA Polymerase Selection Chart. Learn More For more information about exonuclease activity, check out this FAQ. Why do some polymerases blunt and others add a nucleotide? Polymerases that possess proofreading (3´-5´ exonuclease) activity, such as Q5, Phusion, and Deep Vent, will add an untemplated nucleotide to the 3' ends of extended DNA fragments, but the exonuclease activity subsequently removes it. Other polymerases that lack 3´-5´ exonuclease activity (such as Taq and Taq-based polymerases) will add an extra nucleotide to 3´ ends (predominantly, but not exclusively, dA) and leave the untemplated overhang intact. This is why it is important to know which polymerase to use when performing blunt-end or T/A cloning. OneTaq and LongAmp Taq DNA polymerases are optimized blends of Taq (a Family A polymerase) and Deep Vent (a Family B polymerase) DNA Polymerases. The intrinsic polymerase activity of Taq adds a non-templated 3´A, while the 3´–5´ exonuclease activity of Deep Vent increases the fidelity and robustness of Taq, but also blunts PCR products. This is why these products produce a mixture of DNA ends. However, the majority of ends will have a 3'A overhang. Q: What does exonuclease activity mean for a DNA polymerase? A: Polymerases can possess up to two types of exonuclease activity: 5´- 3´ exonuclease activity will digest nucleotides in the 5´ to 3´ direction on a template ahead of polymerase activity. Taq polymerase possesses a specific type of 5´-3´ exonuclease activity called 5' flap endonuclease activity, which catalyzes the cleavage of 5´ DNA flaps from a DNA duplex that has a single-stranded 5´ overhang on one of the strands. 3´ - 5´ exonuclease activity, AKA proofreading activity, digests nucleotides with 3´ hydroxyl groups from the 3´ to 5´ direction. This includes correction of mismatched base pairs and terminal 3´ digestion. Some polymerases possess one or both of these types of exonuclease activities. In the presence of dNTPs, polymerization activity is higher than exonuclease activity. Some polymerases possess neither of these activities. Learn More What does it mean when a polymerase has 5´- 3´ exonuclease activity? When polymerases with 5´- 3´ exonuclease activity encounter a downstream nucleotide on the same strand, the phosphodiester bonds of the encountered strand are hydrolyzed (digested) ahead of polymerization. Taq polymerase possesses a specific type of 5´- 3´ exonuclease activity called 5´ flap endonuclease activity, which catalyzes the cleavage of 5´ DNA flaps from a DNA duplex that has a single-stranded 5' overhang on one of the strands. When Taq polymerase encounters such a flap structure, such as the fluorophore on a qPCR hydrolysis probe, it sequentially digests the phosphodiester bonds between nucleotides in the 5´- 3´ direction ahead of polymerization. The relationship between 3´ - 5´ exonuclease (proofreading) activity and PCR product length. DNA polymerases ensure accurate replication using a series of molecular checkpoints at the site of nucleotide incorporation and beyond. During nucleotide addition, the correct incoming nucleotide is positioned for a productive alignment of catalytic groups, ensuring efficient incorporation. This alignment for catalysis is sensitive to distortions in position caused by incorrect Watson-Crick base pairing, allowing for kinetic stalling at incorrect or non-cognate base pairs. Polymerases that possess proofreading activity “check” whether or not the correct nucleotide has been inserted into the template. If a mismatch is detected, the DNA is transferred from the polymerization domain to the N-terminal 3´ - 5´ exonuclease domain of the polymerase. The incorrectly incorporated nucleotide is excised, DNA moves back into the polymerization domain, and copying can resume. The absence of 3´ - 5´ exonuclease (proofreading) activity may have ramifications other than fidelity in PCR. The lack of proofreading activity in Taq DNA Polymerase has been proposed to limit the maximum amplicon size possible. Generally, Taq performs best when amplifying DNA fragments < 2 kb but can work with fragments up to 3 – 4 kb. When kept to this amplicon size, Taq is a robust, easily optimized enzyme. However, with products above ~3 kb it quickly drops in effectiveness. During PCR, Taq will misincorporate nucleotides and produce mismatches, making it prone to stalling and more likely to dissociate before extending the full-length product. The combination of a certain amplicon size and polymerase error rate can result in accumulation of enough mismatched 3´ ends to effectively inhibit the PCR process. These mismatched 3´ ends are particularly problematic for Taq because it lacks the 3´→ 5´ exonuclease activity to remove them. By mixing in a small amount of a polymerase with proofreading exonuclease activity, such as Deep Vent® DNA Polymerase, amplification of fragments ≥ 20 kb can be achieved (see LongAmp® DNA Polymerase). Since the vast majority of the enzyme in the blend is Taq DNA Polymerase, it is probably doing the bulk of the primer extension, with the proofreading Deep Vent DNA Polymerase removing the inhibitory 3´ mismatches generated by Taq. To learn more about the anatomy of a polymerase and how structure relates to function, see this Feature Article. How to block exonuclease activity during PCR? Add phosphorothioate linkages to primers. A phosphorothioate (pt) bond is a phosphodiester linkage where one of the two non-bridging oxygens has been replaced by a sulfur atom, which inhibits nuclease phosphodiesterase activity. Chemically, the substitution of oxygen with sulfur does not dramatically change the reactivity of the bond, and pt-containing polynucleotides can still function in many enzymatic reactions. In most contexts, 2-3 pt bonds at the 3´ end are sufficient to block polymerase 3´-5´ exonuclease activity. Q: Does Q5® High-Fidelity DNA Polymerase exhibit a strand displacement activity? A: No. Q5 High-Fidelity DNA Polymerase (and all Q5 product formulations) has an extremely weak tendency to displace downstream nucleotides on the non-template strand. To see more characteristics of our polymerases, see the DNA Polymerase Selection Chart. Q: What are the properties of this polymerase (fidelity, product ends, max amplicon, modified base incorporation, etc.)? A: POLYMERASE PRODUCTS FIDELITY* ERROR RATE PRODUCT ENDS MAX PRODUCT LENGTH** EXTENSION TEMPERATURE MODIFIED NUCLEOTIDE INCORPORATION*** URACIL INCORPORATION 5´-3´ EXONUCLEASE 3´-5´ (PROOFREADING) EXONUCLEASE Q5 Polymerases 280X <0.44 x 10-6 Blunt 20kb simple, 10kb complex 72°C 5mC, 5hmC, 6mA No (except Q5U) - ++++ Phusion Polymerases 39-50X 0.44 x 10-6 Blunt 20kb simple, 10kb complex 72°C 5mC, 5hmC No - ++++ OneTaq Polymerases 2X <140 x10-6 3´A/blunt 6kb 68°C 5mC, 5hmC, biotin, DIG Yes + ++ Taq Polymerases 1X 2.85 x 10^-4 3´A 5kb 68°C 5mC, 5hmC, biotin, DIG Yes + - Hemo KlenTaq nt nt 3´A 2kb 68°C Yes No - LongAmp® Polymerases 2X 3´A/blunt 30kb 65°C No Yes ++ *Fidelity relative to Taq DNA polymerase. We continue to investigate assays to characterize Q5's very low error rate to ensure that we present the most accurate fidelity data possible (Potapov, V, and Ong, J.L. (2017) PloS ONE, 12(1): e0169774). **Simple templates include plasmid, viral and E. coli genomic DNA. Complex templates include plant, human and other mammalian genomic DNA and cDNA. *** For more information, contact Technical Support at info@neb.com For more information on properties to help you select a polymerase for your application, please see our DNA Polymerase Selection Chart. Learn More Fidelity and error rate The fidelity of a DNA polymerase is defined by its ability to accurately replicate a template, while error rate is the rate of misincorporation of an incorrectly matched nucleotide. Fidelity is important for applications in which the DNA sequence must be correct after amplification. To learn more about how fidelity is measured, click here. Product ends and exonuclease activity Check out the "Learn More" section on our PCR Product Ends FAQ and our Exonuclease Activity for DNA Polymerases FAQ. Q: What should the final primer concentration be in my PCR? A: POLYMERASE PRODUCTS RECOMMENDED FINAL PRIMER CONCENTRATION (EACH) FINAL PRIMER CONCENTRATION RANGE (EACH) Q5® Polymerases 500 nM 200-1000 nM Phusion® Polymerases 500 nM 200-1000 nM OneTaq® Polymerases 200 nM 50-1000 nM Taq Polymerases 200 nM 50-1000 nM Hemo KlenTaq 300 nM 50-1000 nM LongAmp® Polymerases 400 nM 50-1000 nM We recommend a final primer concentration of 500 nM when using Q5 and Phusion polymerases due to their high 3´-5´ exonuclease activity. We recommend a final primer concentration of 200 nM when using Taq-based polymerases, including OneTaq and EpiMark®. Please refer to specific protocols on the product pages for details regarding range recommendations. Learn More Archaeal Family B polymerases, such as Q5 and Phusion, possess strong 3´-5´ exonuclease activity, which can digest nucleotides on the 3' end of primers and increase the likelihood of nonspecific amplification. Relative to Family A polymerases like Taq and OneTaq, a higher final primer concentration overcomes these effects and promotes specific product formation. Generally, efficient PCR requires optimal ratios of magnesium, other ions, and primers to promote specificity by stabilizing the negative charges on the phosphate backbone. While the composition of Q5 and Phusion DNA Polymerases are proprietary, their buffers are optimized for using a final primer concentration of 500nM. Q: When and how should I use the Q5® High GC Enhancer? A: The Q5 High GC Enhancer is an additive that should be used when dealing with particularly difficult or high GC templates, but can be inhibitory when using high AT content templates. The stand-alone Q5 enzyme can cover a wider range of GC content (up to 80%) with the addition of the GC enhancer. Q5 High GC Enhancer is a supplemental reagent to Q5 enzyme and buffer formulations (M0491 and M0493) and should not be used alone. *This Enhancer is not a stand-alone buffer and should not be used on its own. Additionally, it should not be added to any Q5 Master Mixes (M0492, M0494, M0500, E0555). Q5U does not benefit from the Q5 High GC Enhancer and we do not recommend using it. The addition of common PCR additives, such as up to 2% DMSO, may improve amplification of certain difficult or long targets. It is often not necessary to alter the annealing temperature of your reaction after adding Q5 High GC Enhancer. We recommend using our Tm calculator to determine the annealing temperature of your PCR. Learn More Use of the Q5 High GC Enhancer often lowers the effective range of temperatures at which specific amplification can be observed by reducing complex template secondary structures, which can increase the amplification of your target DNA and improve your yield of hard to amplify products, such as GC rich templates. Generally, PCR additives usually work one of two ways: By reducing secondary DNA structures, thus increasing the amplification of your target DNA Secondary DNA structures can be destabilized by additives that bind to the minor and major grooves of DNA and affecting hydrogen bonding of the duplex. Secondary structures include the double helix (increased hydrogen bonding due to increased GC content) and stem-loop structures (hairpins or bulging nucleotides that reduce hybridization) By reducing non-specific priming and thus reducing the amplification of off-target DNA. Q: Do other polymerases work in Q5® Reaction Buffer? A: The Q5 Reaction Buffer has been formulated specifically for use with Q5 and Q5 Hot Start High-Fidelity DNA Polymerases. Phusion and Taq DNA Polymerases (and related products) show more consistent results in their respective buffers. Q: There is a precipitate in the bottom of the Master Mix tube? Is this normal? A: Q5® Master Mix may precipitate upon freezing and thawing. This does not indicate a problem with the product. For optimal performance, thaw fully and resuspend any precipitate by warming to room temperature and inverting gently until completely dissolved. Q: What are Hot Start and WarmStart® polymerases and when would I use them? A: When setting up room temperature reactions off ice When non-specific amplification is observed What does Hot Start/ Warm Start mean? Our Hot Start and WarmStart polymerases utilize aptamers that inhibit enzyme activity at room temperature, which discourages the formation of nonspecific products. The presence of these aptamers does not alter core enzyme function. The distinction between Hot Start and WarmStart is that Hot Start enzymes are thermophilic while WarmStart® enzymes are mesophilic; the thermodynamic range of the aptamers for Hot Start and WarmStart enzymes are largely similar. Aptamers are engineered oligonucleotides that bind to a specific target molecule through non-covalent interactions and include specific nucleobase modifications that can improve inhibition profiles and/or reduce unintended side effects. The benefit of aptamer-based inhibition over other Hot Start technologies (like antibodies) is that they do not require an activation step and bind reversibly in a temperature-dependent manner. NEB offers polymerases with aptamers for routine PCR, high-fidelity PCR, isothermal amplification, and reverse transcription. These aptamers can target different enzymatic functions for different polymerases. Learn More Why is it called "Hot Start?" Like many non-proofreading, Family A DNA polymerases, Taq Polymerase possesses the ability to add bases onto the end of ssDNA in a template-independent manner even at room temperature, and can result in the addition of non-specific bases onto the ends of DNA primers in the reaction, enabling off-target hybridization and reduced overall reaction specificity. In contrast, at higher temperatures, nonspecific binding is reduced as annealing becomes more stringent. Early methods to mitigate undesired activity at low temperature focused on the exclusion of key reaction components until the reaction temperature was increased, which could then be spiked into the mixture, triggering the reaction under a more restrictive, high temperature condition. Read our feature article, Using aptamers to control enzyme activities Hot Start Taq and beyond, to see data comparing product formation for enzymes with and without aptamer-based inhibition of activity. Q: There is a precipitate in the bottom of the buffer tube. Is this normal? A: Q5® Reaction Buffer may precipitate upon freezing and thawing. This does not indicate a problem with the product. For optimal performance, thaw fully and resuspend any precipitate by warming to room temperature and inverting gently until completely dissolved.