Sartorius, 1776C----------Q, Minisart® NY15 Syringe Filter 1776C----------Q, 0.45 µm Polyamide (Nylon)

Minisart® NY with hydrophilic polyamide (nylon) is optimized for aqueous liquids and solvents with a pH of 3 - 14. Type 1776C with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.

Non-sterile Minisart® NY syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The polyamide membrane combines fastest flow with low non-specific binding. Sartorius polyamide is exceptionally pure compared with other common hydrophilic nylon filters. Competitor nylon membranes are using raw materials which are especially interfere with LC | MS. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.
Bulk packs for less waste
Minimum extractables or leachables
Low non-specific binding
Outperforming chemical compatibility

Specifications
Applications:
Application: Ultracleaning of aqueous and organic solutions
Application Area: Analytical sample preparation

Compliance Information:
Extractables: HPLC certified

Connections (Physical):
Connector Inlet: Female Luer Lock
Connector Outlet: Male Luer Slip

Dimensions:
Filter Diameter: ⌀ 15 mm
Filtration Area: 1.7 cm²

General Specifications:
Filter Paper/Membrane Color: White (opaque); Printed
Flow Rate: ≥ 40 mL/min for water at 1 bar (14.5 psi) | ≥ 110 mL/min for methanol at 1 bar (14.5 psi)
Total Throughput: Up to 15 mL
pH Range: 3.0 – 14.0

Materials of Construction:
Housing Material: Polypropylene (PP)
Membrane Material: Polyamide (PA/NY)

Operating Conditions:
Maximum Allowable Working Temperature: 60 °C (140 °F)
Maximum Operating Pressure: 4.5 bar (65 psi)

Physicochemical Information:
Bubble Point: ≥ 2.0 bar (29 psi) with water
Burst Pressure: ≥ 7.0 bar (102 psi)
Pore Size: 0.45 µm
Wettability: Hydrophilic

Product Information:
Brand: Minisart® NY
Device Type: Syringe Filters
Pack Size: 500
Packaging: Bulk packed
Sample Type: Aqueous; Solvents; Solvent Mixtures

Sterility/Purity:
Delivery Condition: Non-Sterile
Sterilization Method: Ethylene oxide; Autoclave

Volume:
Hold-up Volume: ≤ 30 – 100 µL