Product Description
Effective Filtration Area: 4.5 cm² - 17.3 cm²
Pore Size: 0.65 µm prefilter | 0.45 µm final filter
Membrane Material: Cellulose Acetate
Connectors: Hose Barb ¼“ | Sanitary ¾“ | Luer
Specifications
Applications:
Application: Blood and Plasma; Vaccine Production
Modality: Harvest | Cell Removal; Downstream Intermediates; Form & Fill
Scale: Product Development | Material Screening Filters
Compliance Information:
Bacterial Endotoxins: < 0.18 EU/mL as determined by the LAL test
Biological Reactivity: All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
Extractables: The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
Connections (Physical):
Connector Inlet: 3/4" Tri-clamp 25 mm
Connector Outlet: 3/4" Tri-clamp 25 mm
Connector(s): Inlet: ¾" Sanitary | Outlet: ¾" Sanitary
Dimensions:
Filter Size: 17.3 cm²
Filtration Area: 17.3 cm²
General Specifications:
Capsule/Cartridge Format: Sartoscale 47
Maximum Diffusion: 5 mL/min at 1.5 bar | 22 psi
Minimum Required Bubble Point: 2.0 bar | 29 psi
Vent Valve: Standard
Materials of Construction:
Housing Material: Polypropylene (PP)
Material o-ring | seal: Silicone (SI)
Membrane Material: Cellulose Acetate (CA)
Support Fleece: Polypropylene (PP)
Operating Conditions:
Maximum Differential Pressure: 20 °C: 5 bar, 80 °C: 2 bar
Physicochemical Information:
Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Pore Size Final-filter: 0.45 μm
Pore Size Pre-filter: 0.65 μm
Product Information:
Brand: Sartobran® P
Pack Size: 3
Sterility/Purity:
Delivery Condition: Non sterile - Autoclavable
Sterilization Method: Autoclavable
Usage Protocols:
Sterilization Procedures: Autoclaving: 1 cycle at max. 134 °C, 2 bar | 29 psi, 30 min.
Order Guidelines
1. Price & Stock Available on Request. Click to send email to: service@iright.com
2. Please DO NOT make payment before confirmtaion.
3. Minimum order value of $1,000 USD required.
4. 100% prepayment required.
Collaboration
Tony Tang
Email: Tony.Tang@iright.com
Mobile/WhatsApp/Wechat: +86-17717886924